How to Use Wax Melts

Wax melts offer a simple, flameless way to fragrance your home. Follow these steps for safe use and the best fragrance experience.

What You Need

  • A wax warmer designed for scented wax
  • Phoenix Crafted wax melts
  • A stable, heat-resistant surface

Step 1: Position the Warmer

Place the warmer on a level, heat-resistant surface away from drafts, water, children, pets and flammable materials.

Allow open space around the warmer so heat can disperse safely.

Step 2: Add the Wax

Place a small amount of wax into the clean, dry warmer dish.

  • Begin with one cube or small piece.
  • Add more later if you want a stronger fragrance.
  • Never fill the dish beyond the warmer manufacturer’s recommended capacity.
  • Do not add water, fragrance oil or another liquid.

Step 3: Turn On or Light the Warmer

Electric warmer

Turn on the warmer according to the manufacturer’s directions.

Tealight warmer

Place an approved unscented tealight in the designated holder and light it carefully.

Never use a tealight warmer unattended, and never use a candle larger than the size recommended by the warmer manufacturer.

Step 4: Allow the Wax to Melt

As the wax warms, it will liquefy and begin releasing fragrance.

The time required depends on the warmer and the amount of wax used. Give the fragrance time to circulate before adding more wax.

Step 5: Turn Off the Warmer

Turn off or unplug an electric warmer after use. For a tealight warmer, extinguish the tealight safely.

Allow the wax and warmer to cool completely before touching, moving or cleaning them.

How Long Can Wax Be Reused?

The same wax can usually be reheated for multiple fragrance sessions.

Replace it when:

  • The fragrance is no longer noticeable
  • You want to change scents
  • The wax has collected dust, debris or residue

The wax does not disappear like candle wax because there is no wick consuming it. Only the fragrance gradually fades.

How to Remove Used Wax

Cold removal method

  1. Turn off the warmer.
  2. Allow the wax to cool and harden completely.
  3. Gently lift or press the hardened wax from the dish.
  4. Wipe the dish clean before adding another fragrance.

Warm removal method

  1. Warm the wax only long enough to loosen the bottom.
  2. Turn off and unplug the warmer.
  3. Carefully slide the wax from the dish.
  4. Wipe away residue with a paper towel.

Never pour hot wax into a sink, toilet or drain. Wax can cool and create a blockage.

Changing Fragrances

Clean the warmer dish before switching to a different fragrance, especially when moving between strong or contrasting scent families.

Residual wax may blend with the next fragrance if the dish is not cleaned.

Controlling Fragrance Strength

For a lighter fragrance

  • Use a smaller amount of wax.
  • Run the warmer for a shorter session.
  • Use the warmer in a larger or more ventilated area.

For a stronger fragrance

  • Allow the wax to warm fully before adding more.
  • Add a small additional piece without overfilling the dish.
  • Use the warmer in a smaller or enclosed room.
  • Confirm that the warmer produces enough heat for wax melts.

Can Different Fragrances Be Mixed?

Yes. Compatible wax melt fragrances may be combined to create a custom scent experience.

Begin with small portions and keep track of the ratio so you can recreate the blend later.

Do not mix more wax than the warmer can safely hold.

Wax Melt Safety

  • Use only in an approved wax warmer.
  • Follow all warmer manufacturer instructions.
  • Never leave an operating warmer unattended.
  • Keep away from children and pets.
  • Do not add water or fragrance oil.
  • Do not overfill the warming dish.
  • Do not touch or move the warmer while hot.
  • Keep cords away from walkways and water.
  • Inspect electric warmers and cords before use.
  • Discontinue use if the warmer is cracked, damaged or malfunctioning.

Need Help?

Email Phoenix@Phoenix-Crafted.com for help with wax melt use, fragrance selection or warmer compatibility.